Bruno Out-Sider Scooter/Wheelchair Lift MN & IA

Bruno Out-Sider Scooter Lift. . . . Ath the touch of a button the Bruno Out-Sider with stow your scooter or wheelchair for transportation. Simply roll your mobility device on

Bruno Out-Sider Scooter Lift

Ath the touch of a button the Bruno Out-Sider with stow your scooter or wheelchair for transportation. Simply roll your mobility device on the platform from either side, hit a button, and let the Out-Sider do the lifting for you. Wheelchairs and scooter are automatically secured for you. Retractable belts are also available for securement.

Bruno Out-Sider Scooter Lift Highlights

  • Fully Powered - Makes lifting and storing your scooter or powerchair outside your vehicle virtually effortless - one button operation
  • Smooth drive on/off platform - no reversing necessary
  • Platform automatically folds up when not in use
  • Scooter with Hold-Tite foot or Powerchair with Hold-Tite arm are automatically secured when lift is raised
  • Version with retractable belts for securement also available
  • No scooter or powerchair modifications
  • Operating handle includes intuitive up/down switch orientation, while maintaining Bruno's industry exclusive safety latch for unintended lowering
  • Swing-Away option available for rear hatch access
  • Manual Backup System and standard lighted License Plate Holder
  • Lift powered by the vehicle's battery
  • No structural modifications to your vehicle - mounts to your vehicle's class II or class III hitch receiver (not included)
  • Works with minivans, SUVs, CUVs, pickup trucks, full-size vans and sedans (check with your local Bruno dealer to confirm compatibility with your vehicle)

Bruno Out-Sider Scooter Lift User Requirements

  • Walk from the front to the rear of the vehicle and vice versa
  • Stand two to three minutes
  • Drive mobility device on/off platform
  • Hold down a button on the control arm
  • Securement:
  1. For Automatic Hold-Tite for Scooters version, there are no additional requirements
  2. For Automatic Hold-Tite for Powerchairs version, release and swing arm into position (one handed operation)*
  3. For Retractable Belts version, lean over to hold release lever, then connect hook to receiver on powerchair or scooter.
  • If using a Swing-Away, lean over, release lever, and swing the lift away from the rear of the vehicle*

Brun Out-Sider Scooter Lift Specs

  • Lifting Capacity: 350 lb/159kg
  • Height Adjustable Range: Standard Range Module – 7"/17.8 cm to 19"/49.5 cm
  • Hitch Class: II or III
  • Platform Measurements (Width): 28.5"/ 72.4 cm
  • Applications: Minivans, SUV's, CUV's, Pickup Trucks, Full-size Vans, select Sedans
  • Warranty: 3 years


ASL-250A or ASL-250B: 

  • Mobility Device Securement Methods: Hold-Tite Foot (ASL-250A) or three retractable belts (ASL-250B)
  • Installed Weight w/out Swing-Away: ≈105 lb/48kg
  • Installed Weight w/Swing-Away: ≈142 lb/64kg
  • Maximum Scooter Wheelbase (center of wheel to center of wheel): 24"/61 cm to 37"/93.9 cm (length) x 28"/71.1cm (width)
  • Maximum Powerchair Width (outside of wheel to outside of wheel): 28"/ 71.1 cm (ASL-250B only)


ASL-250HTP (Powerchair version) only:

  • Mobility Device Securement Method: Hold-Tite Arm
  • Installed Weight w/out Swing-Away: ≈110 lb/50kg
  • Installed Weight w/Swing-Away: ≈147 lb/67kg
  • Maximum Powerchair Width (outside of wheel to outside of wheel): 28"/ 71.1 cm


Swing-Away: 

  • Install Weight: 44 lb/20 kg (including hardware and hitch adapter)
  • Hitch Class: II & III
  • Vertical Adjustment: 7"/17.8 cm to 19"/49.5 cm

 

Where To Find Us

Our professional mobility advocacy teams at each location are viewed as the hometown specialists in On-The-Road mobility solutions. Come visit any of our locations to purchase the best quality wheelchair van that money can buy. Each of our locations also offers an extensive line of mobility equipment, together with our Certified Mobility Consultants you'll be sure to achieve your Freedom and Independence with the best solution for your mobility needs.